PURELAB FLEX 3 - TYPE I/TYPE III PURE WATER

PURELAB FLEX 3 - TYPE I/TYPE III PURE WATER

Part Number: PF3XXXXM1

Quick Overview

The PURELAB flex is uniquely designed around your needs. It combines ease of use with the accurate delivery of pure water. The flexible modular system can be configured to deliver the quality of water you need for your applications.


Features



  • Intuitive to use, ergonomic handset design

  • Clear water purity display for absolute confidence as you dispense

  • Real-time TOC monitoring for critical analytical applications

  • Prioritized information shown at all times (system status, TOC, alarm)

  • Point of use filters for multiple applications

  • Flexible dispensing by:• Variable flow - drop by drop or up to 2 liters per minute • AutoVolume dispense with 50ml to 60 liters and repeat dispensing • Hands free with optional foot pedal • Locked dispense for glassware filling




  • General
  • System Performance
  • Dimensions & Weights
  • Feed Water
  • Installation
Main Feature

The PURELAB flex is uniquely designed around your needs. It combines ease of use with the accurate delivery of pure water. The flexible modular system can be configured to deliver the quality of water you need for your applications.

Features

  • Intuitive to use, ergonomic handset design
  • Clear water purity display for absolute confidence as you dispense
  • Real-time TOC monitoring for critical analytical applications
  • Prioritized information shown at all times (system status, TOC, alarm)
  • Point of use filters for multiple applications
  • Flexible dispensing by:• Variable flow - drop by drop or up to 2 liters per minute • AutoVolume dispense with 50ml to 60 liters and repeat dispensing • Hands free with optional foot pedal • Locked dispense for glassware filling

Brand Name Range PURELAB
Applications Electrochemistry
Delivery Flow Rate up to 2 l/min
Daily Usage (8hr day) < 10 l/day
Technologies 185/254 nm UV
Inorganics 18.2 MΩ-cm
Organics (TOC) <5 ppb
Bacteria <0.1 CFU/ml (<1 CFU/10ml)
Endotoxins <0.001 EU/ml
DNase <20 pg/ml
RNase 0.002 ng/ml
Particles 0.2 µm
Footnotes Type III / RO water also available straight from internal reservoir.
Height (mm(inch)) 900-1020
Width (mm(inch)) 236
Depth (mm(inch)) 470
Operating Weight (kg(lb)) 23
Feedwater Nature Potable supply (Tap Water)
Fouling Index <10
Total Chlorine 0.5 ppm
Free Chlorine <0.5 ppm
Carbon Dioxide <30 ppm
Silica <30 ppm
Temperature 4 - 40°C
Flow Rate < 75 l/hr
Drain (gravity fall with air gap) > 90 l/hr
Min. Pressure 2 bar (30 psi)
Max. Pressure 6 bar (90 psi)
Footnotes A 0.2 micron membrane pre filter is recommended for all non-RO feeds to extend point-of-use filter life. If the pressure is <56psi (4 bar) a separate boost pump is recommended.
Installation Options Bench / Wall
Mains Input 100-240V ac, 50-60 Hz
System Voltage 24V DC
Power Consumption 100 VA (Peak Demand)
Noise Level <40 dBA
Footnotes Pro všechny jiné než reverzně osmotické systémy se doporučuje 0,2 µm membránový předfiltr z důvodu prodložení životnosti koncového filtru.


Pokud je tlak < 56psi (4 bar) doporučujeme použít tlakovací čerpadlo